Evaluation of novel ZnO–Ag cathode for CO2 electroreduction in solid oxide electrolyser

CO₂ and steam/CO₂ electroreduction to CO and methane in solid oxide electrolytic cells (SOEC) has gained major attention in the past few years. This work evaluates, for the very first time, the performance of two different ZnO–Ag cathodes: one where ZnO nanopowder was mixed with Ag powder for preparing the cathode ink (ZnO_mix–Ag cathode) and the other one where Ag cathode was infiltrated with a zinc nitrate solution (ZnO_inf –Ag cathode). ZnO_mix–Ag cathode had a better distribution of ZnO particles throughout the cathode, resulting in almost double CO generation while electrolysing both dry CO₂ and H₂/CO₂ (4:1 v/v). A maximum overall CO₂ conversion of 48% (in H₂/CO₂) at 1.7 V and 700 °C clearly indicated that as low as 5 wt% zinc loading is capable of CO₂ electroreduction. It was further revealed that for ZnO_inf –Ag cathode, most of CO generation took place through RWGS reaction, but for ZnO_mix–Ag cathode, it was the synergistic effect of both RWGS reaction and CO₂ electrolysis. Although ZnO_inf –Ag cathode produced trace amount of methane at higher voltages, with ZnO_mix–Ag cathode, there was absolutely no methane. This seems to be due to strong electronic interaction between Zn and Ag that might have suppressed the catalytic activity of the cathode towards methanation.

     

Synthesis,characterizations, and electrochemical studies of ZnO/reduced graphene oxide nanohybrids for supercapacitor application

Herein the present article reports the fabrication of ZnO/reduced graphene oxide (ZnG) nanohybrid following a reduction-based process using a non-hazardous material, i.e., ascorbic acid. The morphology, structure, and bonding in the nanohybrid were analyzed using different techniques. Atomic force microscopy and scanning electron microscopy images show spherical particles of ZnO distributed over reduced graphene oxide (rGO). The X-ray diffraction analysis gives calculated values of crystallite size for ZnO as 15.62 nm. The successful incorporation of ZnO nanoparticles into rGO was confirmed using energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy analyses. The electrochemical studies were performed using an electrolyte (0.5 M H₂SO₄). The calculated value of specific capacitance for the nanohybrid was 345 Fg^-1, which was found to be almost double as compared to that of rGO, which is having a value of only 190.5 Fg^-1 at the same scan rate. The nanohybrid also showed excellent capacitance retention after 1,000 cycles.     

Poly(Pyridinium Salt)s Containing 2,7-Diamino-9,9′-Dioctylfluorene Moieties with Various Organic Counterions Exhibiting Both Lyotropic Liquid-Crystalline and Light-Emitting Properties

A series of poly(pyridinium salt)s-fluorene main-chain ionic polymers with various organic counterions were synthesized by using ring-transmutation polymerization and metathesis reactions. Their chemical structures were characterized by Fourier Transform Infrared (FTIR), proton (¹H), and fluorine 19 (¹⁹F) nuclear magnetic resonance (NMR) spectrometers. These polymers showed a number-average molecular weight (M_ns) between 96.5 and 107.8 kg/mol and polydispersity index (PDI) in the range of 1.12–1.88. They exhibited fully-grown lyotropic phases in polar protic and aprotic solvents at different critical concentrations. Small-angle X-ray scattering for one polymer example indicates lyotropic structure formation for 60–80% solvent fraction. A lyotropic smectic phase contains 10 nm polymer platelets connected by tie molecules. The structure also incorporates a square packing motif within platelets. Thermal properties of polymers were affected by the size of counterions as determined by differential scanning calorimetry and thermogravimetric analysis measurements. Their ultraviolet-visible (UV-Vis) absorption spectra in different organic solvents were essentially identical, indicating that the closely spaced π-π* transitions occurred in their conjugated polymer structures. In contrast, the emission spectra of polymers exhibited a positive solvatochromism on changing the polarity of solvents. They emitted green lights in both polar and nonpolar organic solvents and showed blue light in the film-states, but their λ_em peaks were dependent on the size of the counterions. They formed aggregates in polar aprotic and protic solvents with the addition of water (v/v, 0–90%), and their λ_em peaks were blue shifted.     

A review on sources,toxicity and remediation technologies for removing arsenic from drinking water

Arsenic is a natural element found in the environment in organic and inorganic forms. The inorganic form is much more toxic and is found in ground water, surface water and many foods. This form is responsible for many adverse health effects like cancer (skin, lung, liver, kidney and bladder mainly), and cardiovascular and neurological effects. The estimated number of people in Bangladesh in 1998 exposed to arsenic concentrations above 0.05 mg/l is 28–35 million, and the number of those exposed to more than 0.01 mg/l is 46–57 million. The estimated number of people in West Bengal, India (the border province to Bangladesh), in 1997 actually using arsenic-rich water is more than 1 million for concentrations above 0.05 mg/l and is 1.3 million for concentrations above 0.01 mg/l. The United States Environmental Protection Agency (USEPA) has estimated that 13 million of the US population are exposed to arsenic in drinking water at 0.01 mg/l. The situation has prevailed for more than 10 years and is more severe now. The USEPA lowered the maximum contaminant level (MCL) for drinking water arsenic from 50 to 10 μg/l in 2001 based on international data analysis and research. This recommendation is now on hold. The level of 10 ppb become standard in the European Union (EU) in 2001. Arsenic may be found in water flowing through arsenic-rich rocks. The source is diverse. These include the earth's crust, introduced into water through the dissociation of minerals and ores, industrial effluents to water, combustion of fossil fuels and seafoods. Arsenic-removal methods are coagulation (ferric sulfate, ferrous sulfate, ferric chloride, aluminum sulfate, copper sulfate, and calcium hydroxide as coagulants), adsorption (activated carbon, activated alumina, activated bauxite) ion exchange, bio-sorption, etc.     

Efficient Chemical Protein Synthesis using Fmoc-Masked N-Terminal Cysteine in Peptide Thioester Segments

We report an operationally simple method to facilitate chemical protein synthesis by fully convergent and one-pot native chemical ligations utilizing the fluorenylmethyloxycarbonyl (Fmoc) moiety as an N-masking group of the N-terminal cysteine of the middle peptide thioester segment(s). The Fmoc group is stable to the harsh oxidative conditions frequently used to generate peptide thioesters from peptide hydrazide or o-aminoanilide. The ready availability of Fmoc-Cys(Trt)-OH, which is routinely used in Fmoc solid-phase peptide synthesis, where the Fmoc group is pre-installed on cysteine residue, minimizes additional steps required for the temporary protection of the N-terminal cysteinyl peptides. The Fmoc group is readily removed after ligation by short exposure (<7 min) to 20 % piperidine at pH 11 in aqueous conditions at room temperature. Subsequent native chemical ligation reactions can be performed in presence of piperidine in the same solution at pH 7.     

Density functional theory investigation of structure,stability, and glycerol/hydrogen adsorption on Cu,Cu?Zn,and Cu?ZnO clusters

Extensive density functional theory calculations are performed to analyze the structure and activity of Cu and Cu Zn/Cu ZnO clusters containing up to 10 Cu/Zn atoms. The minimum-energy structures of Cu Zn and Cu ZnO clusters are found by doping minimum-energy pure Cu clusters with Zn atom(s) and ZnO molecule(s), respectively, followed by energy minimization of the resultant clusters. Odd-even alteration in properties that determine cluster stability/activity is observed with cluster size, which may be attributed to the presence/absence of unpaired electrons. The difference in behavior between Zn/ZnO doping can be interpreted in terms of charge transfer between atoms. Charge transfers from Zn to Cu in the Cu Zn clusters and from Cu and Zn atoms to O atom in Cu-ZnO clusters, which implies that the Cu atom acts as an electron acceptor in the Cu Zn clusters but not in the Cu ZnO clusters. Finally, the adsorption energies of glycerol and hydrogen on Cu Zn/Cu ZnO clusters are computed in the context of the use of Cu Zn/Cu ZnO catalysts in glycerol hydrogenolysis. Glycerol adsorption is generally found to be more energetically favorable than hydrogen adsorption. Dual-site glycerol adsorption is also observed in some of the planar clusters. Fundamental insights obtained in this study can be useful in the design of Cu Zn/Cu ZnO catalysts.     

One-Pot Cooperation of Single-Atom Rh and Ru Solid Catalysts for a Selective Tandem Olefin Isomerization-Hydrosilylation Process

Realizing the full potential of oxide-supported single-atom metal catalysts (SACs) is key to successfully bridge the gap between the fields of homogeneous and heterogeneous catalysis. Here we show that the one-pot combination of Ru₁/CeO₂ and Rh₁/CeO₂ SACs enables a highly selective olefin isomerization-hydrosilylation tandem process, hitherto restricted to molecular catalysts in solution. Individually, monoatomic Ru and Rh sites show a remarkable reaction specificity for olefin double-bond migration and anti-Markovnikov α-olefin hydrosilylation, respectively. First-principles DFT calculations ascribe such selectivity to differences in the binding strength of the olefin substrate to the monoatomic metal centers. The single-pot cooperation of the two SACs allows the production of terminal organosilane compounds with high regio-selectivity (>95 %) even from industrially-relevant complex mixtures of terminal and internal olefins, alongside a straightforward catalyst recycling and reuse. These results demonstrate the significance of oxide-supported single-atom metal catalysts in tandem catalytic reactions, which are central for the intensification of chemical processes.     

One‐Pot Cooperation of Single‐Atom Rh and Ru Solid Catalysts for a Selective Tandem Olefin Isomerization‐Hydrosilylation Process

Realizing the full potential of oxide‐supported single‐atom metal catalysts (SACs) is key to successfully bridge the gap between the fields of homogeneous and heterogeneous catalysis. Here we show that the one‐pot combination of Ru₁/CeO₂ and Rh₁/CeO₂ SACs enables a highly selective olefin isomerization‐hydrosilylation tandem process, hitherto restricted to molecular catalysts in solution. Individually, monoatomic Ru and Rh sites show a remarkable reaction specificity for olefin double‐bond migration and anti‐Markovnikov α‐olefin hydrosilylation, respectively. First‐principles DFT calculations ascribe such selectivity to differences in the binding strength of the olefin substrate to the monoatomic metal centers. The single‐pot cooperation of the two SACs allows the production of terminal organosilane compounds with high regio‐selectivity (>95 %) even from industrially‐relevant complex mixtures of terminal and internal olefins, alongside a straightforward catalyst recycling and reuse. These results demonstrate the significance of oxide‐supported single‐atom metal catalysts in tandem catalytic reactions, which are central for the intensification of chemical processes.